hcr_shitek
PF.026.000    versione 6 banks
PF.026.001    versione 12 banks

Download

Accessories

Order code: SC.004.01

Type: IP54 Protection degree 

Dimensions: 96×96 cm (6 or 12 BANKS)

SC.004.01 (96x96)

Order code: AC.012.004

Type: Optical interface USB 2.0

TP-USB-IEC-Optical-Probe-for-Data 2 2

Order code: AC.012.003.01

Type: Serial interface

Schermata 2019-07-17 alle 10.19.25

HCR Automatic power factor

HCR is an automatic power factor regulator with microcontroller, developed for the measurement of signals that are also highly distorted; it allows an accurate control of the electrical quality of the system such as: voltage, current, cos φ, total harmonic distortion in current, total harmonic distortion in voltage and internal temperature.

In addition to the normal power factor management functions, HCR protects the capacitor banks in the event of voltages, currents, harmonic distortions, temperature out of range of the setup.

HCR also disconnects the capacitor banks in case of micro-interruptions of the electric power.

The microcontroller management allows to distribute the operations, extending the life of the capacitors and relays.

Thanks to the innovative “active timing” mode, HCR guarantees the achievement of the setpoint in a constant time, speeding up or slowing down the operations according to the distance from the setpoint.

The internal software allows to set each battery with the nominal value of the capacitors or to set particular functions such as the fixed battery as well as to set the temperature threshold for turning on the ventilation, to manage the intervention of the alarm relay, the ratio of the CT and all the parameters necessary for adaptation to the for adaptation to the power factor correction system in which it is installed.

HCR displays the following measurements: Power factor, RMS voltage, RMS current, THDI and THDV, Active, Reactive, Apparent power, Delta power to reach setpoint and Temperature.

The latest generation LCD display shows the status, measurements, alarms and device setup in a simple and user friendly way.

Through the front optical port, with the dedicated software for a download / upload of data and configurations, it is possible to read and set the instrument setup even without opening the power factor correction system.

HCR have embedded RS232TTL interface that can be integrated with optional RS485 / RS232 interface with standard modbus RTU protocol.

Are available option module for remote management of the system that can be connected to the optional interface such as 3G modem, Ethernet, Wifi

Power supply

Maximum rated voltage 85 → 490Vac
Operating voltage range 85 → 490Vac
Frequency 50/ 60Hz
Power consumption 10VA
Recommended fuse 0.5A

Voltage measure

Measuring range 85 → 490Vac
Frequency range 45 → 65Hz
Input impedance 6MΩ

Current measure

Maximum rated current 6.0A
Operating current range 0.1 -5.0A
Input type Shunt for external C.T.
Power consumption < 1VA

Relay output

Quantity 7
Maximum rated voltage,
open contacts
440v
Maximum rated current 8A→ 250Vac (AC1)
Maximum current
common terminal
10A
Maximum power 2kW
Electrical Life 1*105
Mechanical working life 2*107

Connection

Type Plug in – removable
Diameter of wire 0.5mm → 2.0mm

User interface

Display LCD with back light
Backlight color White
Keypad 4 keys

Optical interface

Standard IEC 62056
Protocol Modbus-RTU
Baud rate 9600bps
Parity None
Stop bit 1

Serial plug*

Type RS232 TTL
Protocol Modbus-RTU
Baud rate 1200 → 115200bps
Parity None – Even – odd
Stop bit 1

*Optional communication module:

  • RS485/RS232
  • USB
  • ETHERNET

Environment operating condition

Operating temperature -20 → +55°C
Storage temperature -30 → +60°C
Relative humidity
(non-condensing)
< 80%

Mechanical characteristics

Dimensions 96*96*57mm
Weight 280g
Enclosure Self-extinguishing V0 plastic
Mounting type Panel Flush mount
Protection degree
  • IP54 front
  • IP20 rear
Panel Cutout 92*92mm