I READ ONE – Data sheet

I-READ ONE –  Leakage Control and Level Measurement

I-READ ONE is a GSM modem that allows remote control of multiple types of systems. In particular, it is used for the monitoring of aqueducts (measurement pressure control consumption), tanks (water-hydrocarbons/chemicals), or watercourses. I-READ ONE records analog input and digital input data, and transfers them at scheduled intervals to the Cloud WebVision. Alarms can be set for the analog measurement or digital inputs that are sent when they are detected.

Alternatively, I-READ ONE can send the data to a customer server with HTPP GET/POST protocol or to an FTP server. The plastic housing guarantees a high degree of protection IP68, the battery can last up to a maximum of 10 years depending on the configuration, the supplied antenna is equipped with an extension cable of 3mt. These features allow the installation even in underground manholes or in situations where there is no power supply from the mains.

I-READ ONE is available in two versions::

• STD version: interface with pressure sensor and two digital inputs
• PRO version: interface with analogue sensor and two digital inputs

In the PRO version, the ANALOGUE input can be 10kOhm or 4-20mA or 0-10V POTENTIOMETRIC.  The STD version is only compatible with the pressure probe.

Features

• Quadband GPRS Communication Module
• 2 independent digital inputs configurable counters or alarms
• 1 analog input for pressure sensor (model STD)
• 1 analog input for standard sensor (PRO model)
• Operating temperature -20°C…+55°C.
• Power supply with internal lithium battery (power supply for external probe at 12Vdc 100mA)
• IP68 protection on supplied case and connectors
• External antenna with cable I=3m
  **Optional battery with a life of up to 10 years

All data can be viewed at any time on the web by combining I-READ ONE with the Web Vision Calore service.